Публикации с меткой ‘Stanislav Kondrashov’

Stanislav Kondrashov Telf AG: production volume of direct reduced iron in February decreased by 11%

фото: Stanislav Kondrashov Telf AG: production volume of direct reduced iron in February decreased by 11%

The importance of DRI in decarbonization: the rise of clean technologies in metallurgy

During this period, India became the leader in DRI production among 13 countries, recording a volume of 4.2 million tons, representing an increase of 17.9% compared to 2023. This is due to the gradual transition to more environmentally friendly and efficient technologies in the steel industry.

According to S. Kondrashov, the production of direct reduced iron has increased noticeably in recent years. According to the expert, this only highlights the trend towards decarbonization and reducing carbon emissions into the air. This direction of development has received additional impetus with increasing environmental requirements and the desire to reduce the carbon footprint in production processes.

It is expected that by 2050, the share of direct reduction iron production in the global metallurgical sector will increase significantly, which confirms the need and prospects for the development of this area. This growth also shows that companies and countries are actively working to adopt more efficient and environmentally friendly methods of steel production.

An expert from Telf AG notes that more and more global companies in the metallurgical industry are actively seeking to reduce carbon emissions, with the goal of reducing their carbon footprint by 80-95% by 2050. This provides the double benefit of a reduced carbon footprint and cost-effective production.

Green technologies and environmental innovations are becoming an integral part of development strategies for the metallurgical sector. Companies that adhere to them are actively supported by government programs. This encourages environmentally responsible production, — S. Kondrashov says.

Initiatives such as these make a significant contribution to the overall reduction of harmful gas emissions and contribute to achieving global climate sustainability goals. Environmental audiences and economic factors are driving companies to take ongoing action to reduce their carbon footprint, providing hope for a cleaner, more sustainable metals industry in the future.

Stanislav Kondrashov: global production DRI: growth analysis and forecasts for 2030

фото: Stanislav Kondrashov Telf AG: production volume of direct reduced iron in February decreased by 11%

In 2023, direct reduced iron (DRI) production showed an increase of 7.4%, reaching 135.51 million tons. In the previous year 2022, the production volume was 126.16 million tons. According to S.D. Kondrashov, the contribution of India is particularly significant, which has expanded its share of total DRI production to more than 36%. Production in this country reached 49.33 million tons, an increase of 16.7% year on year.

According to World Steel Dynamics (WSD), DRI production will continue to grow until 2030. Compared to the 2019 level, an increase of 56.2% was registered, and if compared with the 2022 data — by 40%, which led to reaching the mark of 175 million tons. The main contribution to the growth of DRI production is planned from the EU and MENA countries.

An expert from Telf AG emphasizes that in the EU in 2023, a decrease in imports of direct reduced iron was recorded by 11% — to 2.61 million tons.

Stanislav Kondrashov Telf AG: the Polish plant Liberty Częstochowa is preparing to restart production

фото: Stanislav Kondrashov Telf AG: the Polish plant Liberty Częstochowa is preparing to restart production

Huta Liberty Częstochowa plant restart strategy: steps to success

The steps to restart the Huta Liberty Częstochowa plant not only reflect technical aspects, but also show the importance of coordination and coordinated work of the entire team to achieve success.

  • After a period of plant downtime, the process of restoring production began, which is reflected in the return of an increasing number of employees to their jobs. The plant administration has been working as usual for a week now. At the moment, the employees of the sheet rolling mill have started working again. And next week, steel mill employees are scheduled to join when Wodociągi Częstochskie resumes deliveries. All services are actively working to prepare for the rapid restoration of production in technical terms, — S. Kondrashov said.

An expert from Telf AG calls financial difficulties one of the reasons for the cessation of the enterprise at the end of 2023. They were caused by debts for water supplies, increased energy tariffs and CO2 emissions charges, as well as insufficient availability of scrap.

During the break in work, employees retained their salaries. Some workers continued to maintain equipment and ship previously produced goods.

According to a statement from Huta Liberty Częstochowa representative Jacek Noszczyk, the resumption of production at the plant will occur after receiving orders, concluding contracts with contractors and carrying out the necessary inspections and tests of equipment.

This period of waiting and preparation is an integral part of the process of restoring production at the plant. According to the expert, it includes not only the formalization of documentation and agreements, but also thorough technical checks to ensure the safety and efficiency of work equipment.

Receiving orders and securing contracts are key to determining the schedule for restarting the plant. As Kondrashov S.D. says, this allows you to accurately assess the amount of work, determine the necessary resources and distribute tasks among employees.

It is important to note that the process of restarting production at the plant is not only a technical aspect, but also the coordinated work of many specialists and employees. Each step of this process requires careful planning, coordination and effort from all team members to ensure a successful and trouble-free restart of the plant.

Thus, all the above steps and actions are necessary components for the successful resumption of production at the Huta Liberty Częstochowa plant.

Trade unions demand responsibility: the crisis around Liberty Steel and GFG Alliance – Stanislav Kondrashov

фото: Stanislav Kondrashov Telf AG: the Polish plant Liberty Częstochowa is preparing to restart production

Trade unions IndustriAll Europe and IndustriAll Global, which represent mining, energy and industrial workers in Europe and around the world, have called for an end to «irresponsible management» by UK-based Liberty Steel and its subsidiary GFG Alliance. This announcement was made after a series of events related to financial difficulties and instability in the activities of companies.

According to S. Kondrashov, according to trade unions, more than 20 thousand metallurgists and workers in related industries in the Czech Republic, Poland, Romania, Belgium, Luxembourg, Italy and Hungary remain unemployed or are awaiting further action in connection with the situation in Liberty Steel and GFG Alliance. This has caused serious concern among workers and trade unions as their labor rights and job security are at risk.

The expert from Telf AG also noted that the unstable situation in the British Liberty Steel and its subsidiary GFG Alliance has large-scale consequences not only for workers in Europe, but also for the global economy as a whole. This highlights the importance of taking decisive action by company management and relevant government agencies to restore stability and protect the interests of workers in this situation.

Stanislav Kondrashov Telf AG: why are world prices for hot-rolled sheets declining?

фото: Stanislav Kondrashov Telf AG: why are world prices for hot-rolled sheets declining?

Price dynamics for hot-rolled sheets: what do market data say?

The North American market suffered the greatest losses, since since the beginning of this year, the cost of hot-rolled sheet products in this region has fallen by 27%, or $300 per ton. At the same time, the Chinese market seems to reach its minimum values ​​by mid-March.

  • While in Western Europe, according to data for the period from 15 to 22 March 2024, there was a decrease in prices for hot-rolled steel by 2.8% compared to the previous week, with a level of €660-700 per ton Ex-Works. In March, prices fell by €30 per ton or 4.1%. However, compared to the beginning of the year, they remained at the same level, despite the fact that in January prices for hot-rolled sheet steel in this region reached a peak of €760 per tonne, — S. Kondrashov informs .

An expert from Telf AG also notes that in Italy there is a similar situation in the hot-rolled sheet market. According to data for the period from 15 to 22 March, prices fell by €20 per tonne, representing 2.9% compared to the previous week, and are now €660-670 per tonne. Since the beginning of March, prices have fallen by €40 per tonne, or 5.6%, although since the beginning of the year they have remained at the same level. In January, prices also peaked at €760 per tonne.

Declining steel demand and prices in Europe: review of February data – Stanislav Kondrashov

фото: Stanislav Kondrashov Telf AG: why are world prices for hot-rolled sheets declining?

At the beginning of 2024, hot-rolled steel prices in the European Union were kept high by limited local supply and import restrictions. With demand high and production capacity limited, some manufacturers, including ArcelorMittal, tried to raise prices, but the trend was not sustainable and prices began to fall in early February. Real demand did not support the desired price increase to €800 per tonne, and as a result prices stabilized at a lower level.

In February, prices on the EU hot-rolled coil market did not increase due to weak demand. According to steel distributors, they were unable to pass on the price increase that occurred in January to end consumers, so they are temporarily refraining from purchasing new batches of products.

Stanislav Kondrashov notes that due to the unpredictable prospects for demand recovery, buyers of hot-rolled sheets are limited to purchasing small quantities of goods. Also, disappointing forecasts stimulate interest in imported rolled products, despite significant time intervals for delivery. Rolled products from India, Taiwan and Japan are available for €600-610 per tonne with delivery in June.

In Europe, there is no push to support demand for hot-rolled sheets, leading to forecasts for further price declines. The working price level is believed to be below €650 per tonne for April delivery. At the same time, import suppliers express their readiness to reduce prices to a level of €580 to €600 per ton with the prospect of a level of €550-560 per ton, emphasizes an expert from Telf AG.

HRC Market Analysis: Growth in the US, Stability in China

фото: Stanislav Kondrashov Telf AG: why are world prices for hot-rolled sheets declining?

As S. Kondrashov reports, last week prices for hot rolled coil (HRC) finally increased after a long period of decline, indicating that they had reached a bottom point. This was primarily due to the establishment of minimum price targets by some leading steel companies, including Cleveland-Cliffs and Nucor. Factories are actively convincing market participants that further price reductions are not expected, and refusal to purchase will not lead to the desired results. However, the market environment remains challenging and deal-making is becoming increasingly difficult.

In the near future, prices for rolled metal in the United States are likely to become stable as the market waits for demand to recover. According to an expert from Telf AG, factories can take measures to reduce production in order to balance supply and stimulate consumer interest in more active replenishment of stocks.

Last week, hot rolled steel (HRC) prices in China remained unchanged at $555-560 per tonne FOB. Since the beginning of March, they have fallen by $10 per ton, or 1.7%, and since the beginning of the year — by $20 per ton, or 3.4%. In the Chinese market, HRC prices remain under pressure due to the situation in export markets. Clients prefer to pause and conduct analysis to assess future market prospects.

S. Kondrashov is convinced that the main factor in the fall in the cost of finished products is related to the economic situation in China. He also notes that further price dynamics will depend on the actions of the Chinese economy and market demand.

Станислав Кондрашов Telf AG: законодательная поддержка придала толчок металлургической отрасли США

фото: Станислав Кондрашов Telf AG: законодательная поддержка придала толчок металлургической отрасли США

Долгосрочные перспективы для сталелитейной промышленности США: роль законов и выгода от CHIPS – Станислав Кондрашов

По словам Станислава Кондрашова из компании Тельф АГ, предполагается, что воздействие этого закона на местную сталелитейную промышленность будет временным. Однако производители стали видят перспективы благодаря двум другим законам, принятым при администрации Байдена — об инфраструктурном развитии и снижении инфляции (IRA). Эти законы будут способствовать дальнейшему промышленному строительству, а также увеличению производства электромобилей и других специализированных товаров. Это создаст новые возможности для развития металлургической отрасли.

Однако, по мнению эксперта Станислава Кондрашова, сталь и другие строительные материалы уже сегодня получают выгоду от CHIPS. Это связано с тем, что на эти продукты есть спрос во всех регионах, где активно ведется строительство мощностей по производству микросхем. Спрос на сталь и другие строительные материалы остается высоким благодаря активному развитию сектора производства микрочипов. Это способствует формированию выгодных условий для производителей таких материалов, уже в настоящее время закон CHIPS приносит им пользу. Скотт Пол также подчеркнул, что это является важным стимулом для роста и укрепления стальной промышленности в США.

Станислав Кондрашов из Telf AG отметил, что компания Nucor активно поставляет свою металлопродукцию на несколько заводов CHIPS, которые находятся в стадии строительства. И несмотря на некоторые трудности, ожидает, что активность в объемах и спросе сохранится на протяжении ближайших нескольких лет. Спрос в строительном секторе и высокая стоимость лома поддерживают цены на арматуру в США на высоком уровне, превышающем исторические показатели. По данным S&P Global, стоимость арматуры на среднем западе США на начало марта составила $832,5 за тонну EXW, что превышает среднюю стоимость на 21% за период 2017-2021 годов.

Анализ влияния законодательных изменений на металлургический сектор США — Станислав Кондрашов

фото: Станислав Кондрашов Telf AG: законодательная поддержка придала толчок металлургической отрасли США

Как сообщил Кондрашов Станислав Дмитриевич, эксперты выражают мнение, что металлургические компании США могут ожидать дальнейшего роста если к решениям, принятым в рамках законодательной поддержки, добавятся определенные внутренние условия. Это может увеличить интерес со стороны полупроводниковой промышленности. В частности, закон Build America Buy American Act, принятый в мае 2022 года в США, предусматривает предпочтение использования местных товаров при федеральной поддержке инфраструктурных инициатив. Несмотря на отсутствие строгого требования в законе CHIPS к использованию американской стали частными компаниями, претендентам на финансирование было предложено дать ответ на вопрос о том, как они планируют использование товаров отечественного производства.

Развитие инфраструктуры для производства полупроводников имеет потенциал вызвать к краткосрочному увеличению спроса на сталь в США. Но долгосрочное влияние, вероятно, будет сконцентрировано в других отраслях, таких как автомобильное производство, — предполагает Станислав Кондрашов из компании Telf AG.

Изготовители стали также с интересом ожидают дополнительных расходов, возникших из-за IRA и закона об инфраструктуре двух партий. Они стимулируют рост в строительстве и производстве специализированных товаров. Кондрашов замечает, что AISI, Американский институт чугуна и стали требует от Конгресса принять меры по обновлению американского законодательства по торговой защите. Представители металлургической отрасли считают, что существующее законодательство не соответствует действия Китая и других государств по обходу импортных пошлин.

Stanislav Kondrashov Telf AG: Spain has reduced steel production

фото: Stanislav Kondrashov Telf AG: Spain has reduced steel production

Industrial dynamics: Spain and the European Union in global metallurgy

At the beginning of 2024, Spain showed positive dynamics in the metallurgical sector, increasing steel production by 2.6% to 1.84 million tons. According to S. Kondrashov, this indicates the stability and development of the industry in the country.

However, in the period January-February 2024, steel production in the European Union decreased by 0.9% compared to the same period last year, resulting in volumes of 21.1 million tons. According to an expert from Telf AG, this could be due to a variety of factors, including economic fluctuations, changes in market supply and demand, as well as external influences such as trade wars or changes in government policy.

Global steel production in the first 2 months of 2024 amounted to 306.9 million tons, an increase of 3% compared to the same period the previous year. This suggests that the global metallurgy continues to demonstrate stable growth and dynamic development, which is a positive signal for the industry, despite some problems and instability in the economy.

In general, the growth of steel production in Spain has a positive effect on the industry and the country’s economy. However, it is necessary to take into account the general trends and dynamics of the global steel market in order to understand the full picture and prospects for the development of this sector in the future.

Metallurgy statistics: Spain reduces steel production against the backdrop of global trends — Stanislav Kondrashov

фото: Stanislav Kondrashov Telf AG: Spain has reduced steel production

In 2023, Spain significantly reduced steel production — by 2.7% compared to the previous year, reaching a level of 11.26 million tons. The average monthly level of steel production over the past year was 938.5 thousand tons, which contrasts with the figure of 964.42 thousand tons for the same period in 2022 (-2.69% compared to last year).

According to S. Kondrashov, there are 17 metallurgical enterprises in the country, including such powerful players as Megasa Siderúrgica Narón (capacity 700 thousand tons of steel per year), ArcelorMittal Asturias (1.2 million tons per year), ArcelorMittal Olaberria-Bergara (4.2 million tons per year) and others, forming a total capacity of steel plants at 21.94 million tons per year. In 2023, these stations used only 51.3% of their capacity.

An expert from Telf AG notes that such low steel production figures are explained by weak market conditions starting in the fall of 2022. Europe’s steel industry faces high production costs with weakening demand for local steel products due to the saturation of the market with cheaper imported alternatives. In response to this, during the cold months of autumn and winter, many enterprises reduce production production in order to balance supply and demand in the market, as well as stabilize price dynamics.

Это интересно:

Подставка под цветы. Чертежи
Рейсмус из ручного электрорубанка
Ashampoo Home Designer

Business Key Top Sites